By Seth Friedman

Illustrated by Marcio Noguchi

Text about dogs by Mary Packard

Images
Thunder Bay Press
An imprint of the Printers Row Publishing Group
10350 Barnes Canyon Road, Suite 100
San Diego, CA 92121
www.thunderbaybooks.com

Copyright © 2016 Thunder Bay Press

All rights reserved. No part of this publication may be reproduced, distributed, or
transmitted in any form or by any means, including photocopying, recording, or other
electronic or mechanical methods, without the prior written permission of the publisher,
except in the case of brief quotations embodied in critical reviews and certain other
noncommercial uses permitted by copyright law.

Printers Row Publishing Group is a division of Readerlink Distribution Services, LLC.
The Thunder Bay Press name and logo are trademarks of Readerlink Distribution
Services, LLC.

All notations of errors or omissions should be addressed to Thunder Bay Press, Editorial
Department, at the above address. All other correspondence (author inquiries,
permissions) concerning the content of this book should be addressed to The Book Shop, Ltd.
New York, New York 10010.

Developed by The Book Shop, Ltd.

Models designed and folded by Seth Friedman

Diagrams by Marcio Noguchi

Box, book, and origami papers designed by Eleanor Kwei

Edited by Masao Donahue

Dog information by Mary Packard

Photography of origami models by Andrew Werner

Photo Credits: iStock 2, 6, 12, 20, 26, 32, 40, 48, 56, 64, 74

Publisher: Peter Norton

Publishing Team: Lori Asbury, Ana Parker, Laura Vignale

Editorial Team: JoAnn Padgett, Melinda Allman, Traci Douglas

Production Team: Jonathan Lopes, Rusty von Dyl

www.thebookshopltd.com

eISBN: 978-1-62686-619-5

eBook Edition: July 2016

SYMBOLS

Images | Edge
Images | Existing crease
Images | Valley fold
Images | Mountain fold
Images | Fold in front
Images | Fold behind
Images | Fold and unfold
Images | Hidden lines
Images | Rotate
Images | Sink / Squash / Push
Images | View from here
Images | Turn over
Images | Repeat steps on this side
Images | Magnify
Images | Detailed view to follow
Images | Pleat
Images | Crimp
Images | Reference point
Images | Equal parts reference
Images | Orientation reference
Images | Layer reference

BASIC FOLDS
AND BASES

Images | Preliminary Base
Images | Waterbomb Base
Images | Blintz Base
Images | Kite Base/Fold
Images | Bird Base
Images | Fish Base
Images | Pleat Fold
Images | Petal Fold
Images | Squash Fold
Images | Rabbit-ear Fold
Images | Inside Reverse Fold
Images | Outside Reverse Fold
Images | Crimp Fold
Images | Swivel Fold
Images | Open Sink Fold
Images | Closed Sink Fold
Images | Spread Squash Fold
Images | Elias Stretch Fold

SHIH TZU

Legend has it that the Buddha brought a Shih Tzu with him on his travels. One day, the Buddha was assailed by hoodlums. To protect his master, the small dog transformed into a fierce lion and chased the villains away. When all was safe, the lion became a little dog again. The Buddha picked up the dog and kissed him on the forehead, leaving the white spot that marks the Shih Tzu breed today.

The Shih Tzu descends from noble bloodlines. In Chinese, the name appropriately means “little lion.” Portrayed in the art and literature of China’s Tang Dynasty (618–907 CE), these small dogs are certainly one of the world’s oldest breeds. Historians believe that they originated in Tibet. It was in China, however, where the monks bred them to be gentle companions as well as palace watchdogs for the imperial court. It was during this time that they developed the characteristics that they are now known for.

Today the Shih Tzu continues to fulfill its dual role as cuddly companion and alert watchdog. Known to bark protectively at the approach of strangers, they warm up quickly, greeting people enthusiastically once they are admitted through the door. A social dog, the loving, playful nature of the Shih Tzu makes it a wonderful pet for families with children. Its outgoing nature makes it an effective therapy dog as well.

The breed does not shed. Unclipped dogs are draped in long, luxurious coats that sweep the ground as they walk. To avoid excessive grooming, most owners keep their pet’s coat clipped short with hair on the head swept into an elegant topknot.

Both Shih Tzus follow the same set of instructions. To fold the second Shih Tzu, follow the instructions on the next page, and after completing the first two steps, orient the paper as shown on left on step 3.

1.Orient the paper as shown. Valley fold in half in each direction, and unfold.

2.Valley fold, aligning tips to center, and unfold. Turn over.

3.Valley fold, aligning tips to existing creases.

4.Mountain fold in half. Rotate.

5.Valley fold, aligning existing creases, and unfold.

6.Valley fold, aligning edge to existing crease, and unfold.

7.Unfold.

8.Open, and squash fold along existing creases.

9.Collapse along existing creases, similar to a rabbit-ear fold.

10.Open, and squash fold along existing creases.

11.Valley fold both sides, aligning edges to center, lifting the diamond-shape flap as necessary, and unfold.

12.Open-sink fold using creases from previous step.

13.Turn over.

14.Valley fold, aligning top edge to existing crease.

15.Valley fold, aligning top edge to vertical crease, tucking under the top flap in the upper corner, and unfold.

16.Open, and squash fold along creases from previous step.

17.Valley fold, aligning edge to crease, and unfold.

18.Closed-sink fold using creases from previous step.

19.Valley fold along edge, and unfold.

20.Open, and squash fold along existing creases.

21.Valley fold, aligning corners and creasing firmly, and unfold.

22.Valley fold through all layers except the bottom layer, aligning corners, and unfold.

23.Outside reverse fold, making note of the new creases that need to be added.

24.Valley fold, establishing a lock.

25.Turn over.

26.Reverse fold the edge between layers. See next step for reference.

27. Sink fold the middle edge, inserting the sunken section under the top layer on the opposite side.

28.Mountain fold the corner.

29.Valley fold through all layers, creasing firmly, and unfold.

30.Mountain fold where existing creases intersect, and unfold.

31.Collapse, similar to a Waterbomb Base.

32.Valley fold, aligning edges.

33.Valley fold the triangular flap up and then down, forming the face and nose.

34.Swivel fold, giving shape to the ears.

35.Push, shaping the mouth.

36.Valley fold the flaps outward.

The completed Shih Tzu

BULLDOG

The gentle, affectionate nature of today’s Bulldog belies its violent past. They were once bred to fight bulls in a recreational activity known as bull baiting. Popular during the Middle Ages—first in England, and then throughout Europe—breeders selected for the following traits: a sawed-off, squat body type to keep the dog close to the ground and out of the reach of a bull’s sharp horns; a large head to permit the development of powerful jaws; and a pronounced underbite that allowed the dog to maintain its vice-like grip even as the bull tried to free itself from its powerful jaws.

Bull baiting was banned in 1835. Since then, breeders have selected for more family-friendly qualities. In 2014, the Bulldog was ranked by the American Kennel Club as the fourth most popular breed, so clearly they have succeeded. Known for their gentle, docile temperaments, Bulldogs make terrific pets for families with children. They have even been known to put themselves at risk to save a family member from harm.

An area where breeders have unfortunately fallen short is in going too far to create the preferred Bulldog “look.” A Bulldog’s short head and pushed-in snout have led to upper-airway issues that can become life-threatening, especially when the dog is overheated. Coats are short and glossy, and come in a variety of colors and combinations.

Both Bulldogs follow the same set of instructions. To fold the second Bulldog, orient the paper as shown on left, and proceed to step 1 on the following page.

1. Orient the paper as shown. Valley fold in half in both directions, and unfold. Turn over.

2. Valley fold in half in both directions, and unfold.

3. Valley fold, aligning tip with center.

4. Valley fold, aligning edges, creasing only as indicated, and unfold. Turn over.

5. Establish vertical creases, creasing only as indicated, and unfold. Turn over.

6. Valley fold, aligning creases from previous step to center, and unfold.

7. Valley fold between reference points, creasing only as indicated, and unfold.

8. Valley fold between ends of existing creases.

9. Valley fold along edges, creasing only as indicated, and unfold.

10. Valley fold triangular section in half through both layers, creasing only as indicated, and unfold.

11. Unfold triangular flap.

12. Valley fold, aligning with intersecting creases, and unfold.

13. Valley fold in half. Rotate.

14. Crimp fold using existing creases.

15. Open from below, push where indicated, and spread squash fold.

16. Valley fold flap in half, making the model symmetrical.

17. Close-sink fold the indicated section on both sides.

18. Lift flap along existing valley crease, distribute layers evenly, and push where indicated to squash fold.

19. Lift top layer on both sides of the flap, raise the lower corner, and flatten.

20. Pleat fold using existing creases.

21.Valley fold, closing the flap.

22. Valley fold perpendicular to the bottom edge, and unfold.

23. Valley fold, aligning edges, and unfold.

24. Valley fold, aligning edges to existing creases, and unfold. Repeat steps 22–24 on opposite side.

25.Open the flaps slightly to reverse fold, aligning top edge to crease from step 23, tucking between layers, and unfold.

26.Valley fold, opening the flap.

27.Valley fold between reference points, creasing firmly and only as indicated, and unfold.

28.Valley fold, closing the flap.

29.Valley fold along existing crease.

30.Valley fold, aligning edges, and unfold.

31.Reverse fold using creases from previous step.

32.Valley fold flap in half, creasing firmly, and unfold.

33. Open the flap partially and sink fold the indicated section. Sink all layers except the exterior layer on the top half.

34. Repeat steps 29–33 on opposite side.

35. Lift the central layer as far as the paper allows.

36. Open the head partially, push downward on the crease created in step 27, and sink fold the entire head.

37. Valley fold, creasing firmly, and unfold.

38. Open the head partially and reverse fold both indicated edges, lowering the corner.

39. Valley fold flaps on both sides.

40.Open the head partially, and outside reverse fold, wrapping paper onto itself. Tip should extend slightly beyond upper corner.

41.Open the head partially and valley fold, wrapping paper onto itself once more.

42.Reverse fold, shaping the mouth.

43.Valley fold, aligning edges.

44.Reverse fold asymmetrically, tucking excess paper between layers.

45.Repeat steps 43–44 on opposite side. Mountain fold central protruding flaps inside the model.

46.Mountain fold layers inside in the model. A small reverse fold will be required near the front legs.

47.Mountain fold, giving shape to the front paws.

48.Reverse fold the tip of the feet.

49. Reverse fold both sides. The distribution of layers within will not be even.

50. Crimp fold, aligning the base of the front and hind legs.

51. Reverse fold the tip of the hind legs. Shape the chest.

The completed Bulldog

SHETLAND SHEEPDOG

Though this little “Lassie” dog is often mistaken for a miniature Rough Collie, the Shetland Sheepdog is its own breed. Of mysterious lineage, experts believe that it is a mix of a number of pedigrees including the Scandinavian Spitz, the Border Collie, the Pomeranian, and perhaps the Cavalier King Charles Spaniel. Also known as the “Sheltie,” the breed was first recognized by the American Kennel Club in 1911.

Its roots spring from the Shetland Islands, where the dogs were first bred to herd and protect the miniature livestock that are indigenous to the region. Energetic, agile, and chock-full of stamina, these active little dogs were more than up to the task. Their dual-layered coats, made of a thick layer of fur beneath a water-resistant top coat, kept them warm and dry as they worked.

Today, though Shetland Sheepdogs are no longer used for herding, they are highly prized as family pets. Capable of learning commands in fewer than five repetitions, Shetland Sheepdogs continually surprise their owners with their superior intelligence. Their athletic, fun-loving nature makes them the perfect companions for anyone who enjoys a game of Frisbee. Like most herding dogs, Shelties are very territorial and are known to bark at anything that moves. Although they make excellent watch dogs, they are not recommended for apartment living. Shelties come in a variety of colors and patterns, including merle—a coat with mottled patches of color.

Both Shetland Sheepdogs follow the same set of instructions. To fold the second Shetland Sheepdog, orient the paper as shown on right, and proceed to step 1 on the following page.

1.Orient the paper as shown. Turn over.

2. Valley fold in half in each direction, and unfold.

3.Valley fold, aligning lower edges to center.

4.Valley fold, wrapping over the edge, and unfold.

5.Unfold entirely.

6.Mirror steps 3–5 from opposite direction. Turn over.

7.Valley fold between sets of reference points, and unfold.

8.Valley fold perpendicular to upper edges, creasing only as indicated, and unfold.

9.Valley fold between reference points, creasing only as indicated, and unfold.

10.Valley fold, aligning reference points, and unfold.

11.Valley fold, aligning edges to existing creases, and unfold. Turn over.

12.Valley fold between sets of reference points, creasing only as indicated, and unfold.

13.Valley fold between sets of intersecting creases, parallel to paper’s edge, and unfold. Turn over.

14.Valley fold along existing creases.

15.Mountain fold in half.

16.Open and squash fold. Rotate.

17.Reverse fold asymmetrically using existing creases, drawing long diagonal edges underneath toward the center.

18.Valley fold along existing crease.

19.Unfold the triangular flaps from behind.

20.Valley fold triangular flap, incorporate existing mountain crease, release trapped paper, and squash fold bottom section to flatten.

21.Reverse fold using existing creases.

22.Valley fold flap to opposite side.

23.Open the flap partially, and carefully wrap the layers around.

24.Repeat steps 20–23 on opposite side.

25.Rabbit-ear fold. The upper corners will need to be lifted and squash folded to flatten.

26.Valley fold, aligning crease to edge underneath.

27.Valley fold, aligning edges to center.

28.Valley fold in half, making the model symmetrical. Rotate.

29.Valley fold, aligning upper edge with existing crease, and unfold.

30.Inside reverse fold.

31.Valley fold perpendicular to point where creases meet, and unfold.

32.Outside reverse fold, incorporating indicated crease, and squash fold.

33.Valley fold, aligning edge to existing crease, and unfold.

34.Outside reverse fold using creases from previous step.

35.Reverse fold near both sides of the neck by swivel folding near the bottom, tucking the excess paper under the layers of the head.

36.Reverse fold the protruding corners.

37.Mountain fold corners on both sides inside the model.

38.Valley fold, aligning edges. If unable to do so, top of folds in previous step must be made closer to the top of the head.

39.Open from above, distribute layers evenly, and squash fold.

40.Mountain fold section in half.

41.Outside reverse fold, adjusting angle as required.

42.Release trapped paper on both sides and flatten.

43.Crimp fold. Pre-crease as necessary.

44.Open the head partially, and valley fold by wrapping paper onto itself. Mountain fold both sides of the jaw inside the model.

45.Gently pull the tail, pivoting downward, creating a crimp fold at the top to flatten.

46.Reverse fold, tucking the excess paper between layers.

47.Close-sink fold the back of the tail, pre-creasing as necessary. Reverse fold the back, as well as the tip of the tail. Round the chest and belly.

The completed Shetland Sheepdog

SCHNAUZER

We know that Schnauzers have been around for centuries, since depictions of them can be seen in medieval tapestries and paintings. But it was not until the 1800s that Germans first thought to standardize these dogs by crossing the Wolfspitz with black Poodles. The breed acquired its name in 1879 at a show in Hanover, Germany when a dog named Schnauzer (the German word for “muzzle” is schnauze) took first place. Since then, breeders have further selected for size so that Schnauzers now can be found in standard, miniature, and giant varieties.

The highly intelligent Schnauzer excels in a number of tasks, such as rooting out vermin, herding farm animals, and hunting and retrieving both on land and in water. They regularly place well in performance sports such as agility training, make superb guard dogs, and have even been used in search and rescue missions.

Schnauzers are easily recognizable by their distinctive muzzles that sport bristly mustaches and full beards. Their coats are double layered, with a wiry topcoat over a soft undercoat. They come in pure black or in a salt and pepper combination. Most owners keep their dogs trimmed.

Because of their high energy level, it is important to give these dogs at least one hour of vigorous exercise every day. They make affectionate and loyal family pets but are extremely protective and territorial—with a tendency to be wary of strangers and other dogs.

Both Schnauzers follow the same set of instructions. To fold the second Schnauzer, orient the paper as shown above, and proceed to step 1 on the following page.

1.Orient the paper as shown. Turn over.

2.Valley fold in half in each direction, and unfold.

3.Valley fold, aligning edges to center, and unfold.

4.Valley fold between sets of reference points, and unfold.

5.Valley fold where creases intersect, starting with the right side.

6.Valley fold between corners.

7.Turn over.

8.Valley fold, aligning edges on four corners, and unfold.

9.Unfold triangular flap.

10.Valley fold both layers, aligning bottom edge to tip of triangular section, and unfold.

11.Valley fold, aligning outer edges to center, allowing the triangular flaps to flip outward.

12.Valley fold, aligning edges to existing creases, and unfold.

13.Valley fold top layer to opposite side.

14.Rabbit-ear fold. Pre-crease as necessary.

15.Valley fold along creases created in step 12, and squash fold near the center to flatten.

16.Valley fold, aligning edges, and unfold.

17.Swivel fold, aligning edges of lower section, and then incorporate crease from previous step.

18.Valley fold flap to opposite side.

19.Repeat steps 13–18 on opposite side.

20.Open both sides, pivoting corners in opposite directions, allowing the triangular flap to flip outward.

21.Valley fold, aligning edge to existing crease, and unfold.

22.Valley fold, aligning edges to existing creases, creasing only as indicated, and unfold.

23.Valley fold between reference points.

24.Swivel fold, starting with creases from step 22.

25.Mountain fold through all layers, allowing tail to flip outward.

26.Turn over.

27.Valley fold on both sides, creating a small reverse fold between layers at the bottom.

28.Valley fold between reference points, and unfold.

29.Mountain fold horizontally at point where creases meet, and unfold.

30.Valley fold, aligning reference points, creasing only as indicated, and unfold.

31.Valley fold, aligning reference points, creasing only as indicated, and unfold.

32.Mountain fold between existing creases, and unfold.

33.Pleat fold using existing creases.

34.Valley fold in half, incorporating the crimp fold in the middle using existing creases. Rotate.

35.Valley fold along existing crease through all layers, and unfold.

36.Reverse fold both edges.

37.Valley fold both sides, aligning corners, and unfold.

38.Open top section partially, and sink fold both flaps using creases from previous step.

39.Sink fold the middle layers, and then carefully outside reverse fold along edge.

40.Open the head partially, and valley fold by wrapping paper onto itself.

41.Mountain fold, wrapping inside the model.

42.Pre-crease, then sink fold the middle flap.

43.Crimp fold, shifting layers to the top.

44.Mountain fold both sides, incorporating a reverse fold near the neck. Then pleat fold, shaping the ears.

45.Outside reverse fold the tail. Then pleat fold the rear legs.

46.Mountain fold on both sides, incorporating a small squash fold at the top.

47.Reverse fold each of the four legs so that the model can stand upright.

The completed Schnauzer

BEAGLE

Beagles are known for their affectionate, fun-loving disposition—the trait that undoubtedly landed this breed the star role of Snoopy in the ever-popular Peanuts franchise. Like Basset Hounds, the Beagle’s low-slung body, droopy ears, and impressive nose make it an excellent tracker. Bred to hunt rabbits and other small game, a Beagle is equipped with an additional tool in its hunting arsenal—its voice. The word beagle is thought to come from a French word begueule, meaning “open throat.” Its unique vocal chords allow it to produce three distinct sounds: a standard bark; a yodel-like bay that alerts its owners and other dogs that it has caught a scent; and a soul-piercing howl that lets you know there’s a Beagle nearby loving the sound of its own voice!

Unfortunately, unlike the Basset Hound, Beagles are not a great choice for apartment living. They are much too noisy. On top of that, these dogs are bundles of energy and need a lot of exercise. It’s advised to provide them with a yard to run around in—one that is surrounded by a very secure fence. Their curiosity cannot be contained; they like nothing better than to follow their nose, chasing down an inviting scent. Like Bassets, these hounds come in combinations of three basic colors: black, chestnut, and white, and their gentle nature makes them a wonderful breed for families with small children.

Both Beagles follow the same set of instructions. To fold the second Beagle, orient the paper as shown above, and proceed to step 1 on the following page.

1.Orient the paper as shown.
Valley fold in half in both directions, and unfold.

2.Valley fold, aligning edges to center, and unfold.

3.Valley fold, aligning creases with ends of creases from previous step.

4.Valley fold at angle bisectors.

5.Unfold everything.

6.Valley fold between reference points, and unfold.

7.Valley fold vertically, aligning creases to intersecting sets of creases, and unfold.

8.Valley fold vertically, aligning creases from previous step to center, and unfold.

9.Valley fold along existing crease.

10.Valley fold through both layers along existing creases, and unfold.

11.Mountain fold in half.

12.Valley fold through all layers, aligning lower edge to existing crease, and unfold.

13.Unfold everything.

14.Collapse using indicated creases, reversing the necessary creases before trying the collapse.

15.Collapse in progress. Rotate to achieve next step’s position.

16.Open from the top, valley fold, and evenly spread layers to squash fold.

17.Valley fold flap in half, making the model symmetrical.

18.Valley fold, opening the flap.

19.Pleat fold, reversing both existing creases.

20.Valley fold along existing crease.

21.Valley fold once again along existing crease.

22.Valley fold triangular flap along its hinge, and unfold.

23.Inside reverse fold using creases from previous step.

24.Valley fold top layer, wrapping over the edge.

25.Valley fold triangular flap, creasing firmly, and unfold.

26.Inside reverse fold using creases from previous step.

27.Repeat steps 18–26 on opposite side.

28.Sink fold the indicated section.

29.Valley fold as indicated, and unfold.

30.Valley fold as indicated, and unfold.

31.Valley fold, aligning creases from previous two steps, and unfold.

32.Valley fold, aligning existing crease to right edge, and unfold.

33.Open model carefully. View from above.

34.Collapse using indicated creases. The top corner will pivot downward.

35.Pivot from the top, and crease when the diagonal edge becomes vertical. Repeat on opposite side.

36.Valley fold flap downward along its hinge.

37.Valley fold, aligning edge to existing crease, and unfold.

38.Valley fold, aligning reference points, and unfold.

39.Push where indicated, creating new mountain creases to sink fold indicated section. This action will allow the rest of the head to collapse.

40.Valley fold flap downward along its hinge.

41.Repeat steps 36–40 on opposite side.

42.Fold flaps on both sides inside the model.

43.Valley fold, creasing firmly, and unfold.

44.Open the top carefully and reverse fold the three edges, pivoting the head downward.

45.Reverse fold on both sides, tucking excess paper behind the ears.

46.Valley fold, tucking corner between layers.

47.Valley fold flap along its hinge, making the model symmetrical.

48.Push from both sides, establishing new creases, and pivot section carefully to the left to collapse.

49.Valley fold flap along its hinge, making the model symmetrical.

50.Open the head partially, and valley fold by wrapping paper onto itself.

51.Mountain fold a very small section.

52.Mountain fold both sides inside the model.

53.Mountain fold three flaps at the top of the head inside the model.

54.Valley fold along existing creases on both sides.

55.Swivel fold on both sides by establishing long, diagonal valley creases and releasing trapped paper on the right side.

56.Inside reverse fold, lowering the tail.

57.Valley fold flaps upward on both sides.

58.With great care, partially open the back, and reverse the interior creases to change the color of the paper.

59.Swivel fold on both sides using existing creases.

60.Valley fold along existing creases on both sides, tucking excess paper between layers.

61.Crimp fold, lifting the tail.

62.Valley fold both sides, narrowing the tail.

63.Crimp fold. Pre-crease as necessary to simplify fold.

64.Mountain fold both sides inside the model. A small swivel fold will be required near the rear legs.

65.Mountain fold, aligning base of paws with rear legs. Mountain fold, rounding the rear legs.

66.Release trapped paper, and fold excess between the layers of the back.

The completed Beagle

GREAT DANE

The Great Dane is certainly “great” in size and in regal bearing. In the eighteenth century, French naturalist George-Louis Leclerc first saw the breed on a trip to Denmark and promptly dubbed it le Grand Danois, or “Great Dane.” The name has stuck ever since.

Although Dane-like dogs are prevalent in the art of ancient Egypt, Greece, and Rome, it is the Germans who are given credit for shaping the breed we are familiar with today. First bred to hunt wild boar, German breeders needed a dog that was tall and fast enough to bring down large prey. To achieve strength and stature, they crossed muscular English Mastiffs with long-legged Irish Wolfhounds. The Greyhound was then added to select for speed.

Great Danes are between 30–34 inches tall and weigh between 120–200 pounds. Though muscular, they still have a graceful bearing due to their long legs, large and noble head, and elegantly arched neck. Their short coats come in six colors: black, white, fawn, blue (really a shade of gray), harlequin (irregular black patches on white), and mantle (with a black blanket-like coat). When cropped, the ears stand high on the head. In their natural state, they fold over and lie close to the cheeks.

Though its stature might be intimidating, the Great Dane is one of the gentlest of dog breeds. Like the tiny Chihuahua, it seems to be oblivious to its size. In fact, these huge pups are known for their habit of draping themselves lovingly across an owner in a futile attempt to fit itself onto a friendly lap.

Both Great Danes follow the same set of instructions. To fold the second Great Dane, orient the paper as shown above, and proceed to step 1 on the following page.

1.Orient the paper as shown. Turn over.

2.Valley fold in half in both directions, and unfold.

3.Valley fold, aligning edges to center, and unfold.

4.Valley fold, aligning tips to center, and unfold. Turn over.

5.Valley fold, aligning upper edges to horizontal center crease, and unfold.

6.Valley fold through intersecting creases, parallel to outer edges, and unfold.

7.Valley fold, aligning creases from previous step to center crease, and unfold.

8.Fold, aligning lower edges to intersecting creases, creasing only as indicated, and unfold. Turn over.

9.Valley fold between reference points, creasing only as indicated, and unfold.

10.Valley fold between sets of reference points, creasing only as indicated, and unfold. Turn over.

11.Valley fold, aligning end of crease from step 7 to intersecting creases on opposite side, and unfold.

12.Pleat fold long creases, and flatten, treating the bottom section similar to a rabbit-ear fold.

13.Unfold everything.

14.Prepare the collapse by reversing any necessary creases. Then, using previous pleat, as well as additional indicated creases, collapse the paper, establishing new creases to do so.

15.Swivel fold by valley folding along the long diagonal crease and squash folding the top section.

16.Valley fold, aligning edge to existing crease, and unfold.

17.Reverse fold using creases from previous step.

18.Valley fold, tucking the flap between layers.

19.Valley fold flap to the opposite side.

20.Valley fold flap to the opposite side.

21.Repeat steps 15–19 on opposite side.

22.Reverse fold both sides, folding the lifted flap downward.

23.Valley fold along existing creases, reverse folding near the top.

24.Valley fold along underside edge, creasing only as indicated, and unfold.

25.Carefully wrap the layer from behind.

26.Stand the top layer upright.

27.Mountain fold in half, incorporating the indicated creases. Rotate.

28.Valley fold, aligning edge to existing crease, and unfold. Repeat on opposite side.

29.Valley fold, aligning edges, and unfold.

30.Establish set of valley folds, and unfold. Repeat on opposite side.

31.Lower the left corner, incorporating the established creases from previous step, and distribute the layers symmetrically to flatten.

32.Valley fold both sides, aligning edges.

33.Carefully pull the flap as far as the paper allows, establishing new creases to flatten.

34.Valley fold flaps on both sides.

35.Valley fold, aligning top edge to corner, and unfold.

36.Outside reverse fold using creases from previous step.

37.Valley fold flaps along hinges.

38.Valley fold on both sides, aligning edges.

39.Mountain fold flaps along existing creases on both sides.

40.Valley fold flaps along hinges.

41.Sink fold. Pre-crease as necessary.

42.Mountain fold corners inside the model on both sides.

43.Open the head partially and valley fold, nearly aligning corners, wrapping paper onto itself.

44.Mountain fold inside the model.

45.Reverse fold using existing creases, pushing where indicated.

46.Reverse fold, further shaping the ears.

47.Crimp fold. Pre-crease as necessary.

48.Reverse fold, shaping the mouth.

49.Reverse fold edges on both sides.

50.Valley fold flaps along hinges on both sides.

51.Valley fold, aligning corners, and unfold.

52.Valley fold perpendicular to lower edge, between reference points, and unfold.

53.Sink fold the shaded area …

54.…and then crimp fold, incorporating indicated creases to flatten.

55.Valley fold the tail upward.

The completed Great Dane

SIBERIAN HUSKY

Ancestors of the Siberian Husky lived thousands of years ago among the nomadic Chukchi, a people who relied on dogs to haul their sleds across the frigid northernmost reaches of Siberia. First brought to Alaska in 1908 by Russian fur traders, the modern-day Siberian Husky retains the same traits that made it so indispensable to the Chukchi. Fur-lined paws coupled with a densely-layered waterproof coat allows it to withstand temperatures as low as 60 degrees below zero. The breed’s uncanny ability to slow its metabolism, allowing it to maintain its stamina on very little food, contributes to its amazing endurance.

In 1925, relay teams of sleds pulled by Siberian Huskies proved to the world what they were made of. Racing across 674 miles of frozen tundra, they delivered life-saving serum to the residents of Nome, Alaska, in time to save them from a full-blown diphtheria epidemic. A statue of Balto, one of the lead dogs, stands in New York City’s Central Park to commemorate this heroic event.

Siberian Huskies are loyal and affectionate pets who love children. But because they are so friendly and rarely bark, they do not make stellar watch dogs. These dogs need hours of intense exercise each day, and do best with families who provide them with a spacious fenced-in yard. Known for their striking good looks, Siberian Huskies come in a wide variety of colors and patterns. Their eyes range from blue, green, brown, amber, or mixed, with each eye sometimes being a different color.

Both Siberian Huskies follow the same set of instructions. To fold the second Siberian Husky, orient the paper as shown on left, and proceed to step 1 on the following page.

1.Orient the paper as shown. Valley fold in half, and unfold. Turn over.

2.Valley fold in half, and unfold.

3.Valley fold, aligning three tips to center, and unfold. Turn over.

4.Valley fold, aligning creases from previous step to center creases, and unfold.

5.Valley fold in half in each direction, and unfold.

6.Pleat fold using existing creases.

7.Turn over.

8.Valley fold, aligning corners, and unfold. Turn over.

9.Valley fold, aligning creases from previous step to horizontal crease, and unfold.

10.Rabbit-ear fold using existing creases.

11.Valley fold flap to opposite side, creasing firmly.

12.Unfold everything.

13.Reinforce existing creases, preparing for collapse …

14.…and collapse the paper. Rotate.

15.Valley fold flaps on both sides.

16.Valley fold, aligning edges, creasing firmly, and unfold.

17.Open the model and reverse fold the three top edges using creases from the previous step.

18.Valley fold flaps on both sides.

19.Valley fold flap along its hinge.

Note: It may be easier to complete Steps 19–27 on both sides at the same time.

20.Reverse fold using creases from previous step.

21.Valley fold flap along its hinge.

22.Reverse fold using creases from previous step.

23.Valley fold flap along its hinge.

24.Valley fold, aligning edge to existing crease, and unfold.

25.Valley fold between reference points, and then rabbit-ear fold using existing creases.

26.Valley fold, aligning edges.

27.Mountain fold along edge, tucking excess paper between layers.

28.Repeat steps 19–27 on opposite side, if not already completed.

29.Valley fold, aligning edges on both sides, and unfold.

30.Reverse fold on both sides using existing creases, tucking excess paper between layers.

31.Valley fold flaps on both sides.

32.Valley fold through all layers, aligning edges, creasing firmly, and unfold.

33.Valley fold flap to opposite side.

34.Pleat fold using existing creases.

35.Separate the pleated layers so they are no longer locked together and can be moved independently.

36.Valley fold, aligning edges.

37.Valley fold, aligning edge to existing crease, and unfold.

38.Reverse fold using creases from previous step.

39.Valley fold flap to opposite side.

40.Starting from the left tip, valley fold along long diagonal crease, and push where indicated to collapse and flatten the model, swinging the ear back upright.

41.Repeat steps 32–40 on opposite side.

42.Valley fold perpendicular to flap’s bottom edge, and unfold.

43.Valley fold perpendicular to flap’s top edge, pivoting from bottom of existing crease, and unfold.

44.Crimp fold using creases from two previous steps.

45.Release trapped paper and flatten.

46.Flatten the nose. View from above.

47.Valley fold by wrapping paper onto itself.

48.Mountain fold slightly below corners on both sides. Then close the nose.

49.Mountain fold both sides inside the model, giving shape to the jaw.

50.Valley fold small sections on both sides, giving shape to the eyes.

51.Reverse fold, shaping the top of the head.

52.Crimp fold, allowing the outer layers to shift. Rotate.

53.Mountain fold both sides inside the model, incorporating a small reverse fold near the rear legs.

54.Mountain fold three edges inside the model, giving shape to the back.

55.Valley fold twice, roughly parallel to each other, and unfold.

56.Crimp fold using creases from previous step.

57.Mountain fold, narrowing the tail.

58.Crimp fold the rear leg. Repeat on opposite side.

59.Pleat fold the ears on both sides, shape the front legs along existing creases, and curl the tail.

The completed Siberian Husky

CHIHUAHUA

The Chihuahua just might possess one of the purest of all canine pedigrees. It is named for the Mexican state of Chihuahua, the area where the dog was thought to have originated. Until recently, conventional wisdom had it that the modern-day Chihuahua bore little resemblance to the one kept so long ago by the indigenous populations of the Americas. It was assumed that a Chihuahua’s DNA would have been radically transformed by crossing it with breeds brought to the region by European settlers. However, scientific research refutes these claims. Recent DNA studies have, in fact, proven that the modern-day Chihuahua has remained relatively unchanged, and can even trace its Mexican lineage back a thousand years, with roots that stretch even further back to Asia.

One thing few can dispute is how cute this playful pup can be. The quintessential lapdog, Chihuahuas enjoy being picked up and cuddled by their owners. Though Chihuahuas are affectionate and devoted to their owners, they are not recommended as pets for families with very young children who might injure them by mistake. The smallest breed in the world, it possesses the largest brain of any dog relative to its size. Once they reach maturity, a Chihuahua may resist any attempts to correct its behavior, so it’s best to start training them right away. Known for its outsized self-image, this high-spirited dog has been known to challenge dogs many times its size. They come in long- and short-hair varieties, in an endless array of colors and patterns.

Both Chihuahuas follow the same set of instructions. To fold the second Chihuahua, orient the paper as shown on right, and proceed to step 1 on the following page.

1.Orient the paper as shown. Valley fold in half in each direction, and unfold. Turn over.

2.Valley fold, aligning edges to center, and unfold.

3.Valley fold between reference points, and unfold.

4.Valley fold vertically from where existing creases meet, starting with the right side.

5.Mountain fold in half. Rotate counter-clockwise.

6.Valley fold along edge, and unfold.

7.Valley fold, reinforcing existing crease, and unfold.

8.Valley fold perpendicular to left edge, pivoting from where existing creases meet, and unfold.

9.Valley fold along existing crease.

10.Valley fold along the crease on the back, and unfold.

11.Unfold.

12.Reverse fold using existing creases.

13.Reverse fold using existing creases.

14.Reverse fold using existing creases, pivoting the left corner downward.

15.Valley fold, aligning edges, creasing firmly only as indicated, and unfold.

16.Valley fold triangular flap along its hinge, and unfold.

17.Valley fold parallel to top edge, aligning crease to point where existing creases intersect, and unfold. Be careful not to allow the paper to shift.

18.Valley fold the triangular flap.

19.Valley fold along existing crease, incorporating a reverse fold underneath the flap.

20.Repeat steps 15–19 on opposite side.

21.Valley fold, aligning edges, and unfold.

22.Valley fold horizontally, aligning crease through intersecting creases.

23.Valley fold, aligning edges, and unfold.

24.Unfold the triangular flap.

25.Rabbit-ear fold using existing creases.

26.Outside reverse fold using existing creases.

27.Repeat steps 21–26 on opposite side.

28.Valley fold along edge, creasing firmly, and unfold.

29.Sink fold using creases from previous step.

30.Valley fold, aligning top edge to both sides of the vertical crease, creasing firmly, and unfold.

31.Open slightly and sink fold the interior layers using creases from the previous step in preparation for a collapse. View from above.

32.Collapse using indicated creases, pivoting the front legs downward in the process.

33.Valley fold, aligning edges.

34.Valley fold, aligning edges.

35.Repeat steps 33–34 on opposite side.

36.Valley fold along edge, and unfold.

37.Open layers carefully, and reverse the sunken section.

38.Valley fold starting from the corner on the left side, establishing a perpendicular crease from the right edge, and unfold.

39.Valley fold where existing creases intersect, keeping the horizontal crease aligned, and unfold.

40.Sink fold using creases from previous step.

41.Swivel fold on both sides, aligning lower edges.

42.Crimp fold, redirecting the tail.

43.Valley fold the tail on both sides, incorporating a small squash fold near the rear legs. Then mountain fold, shaping the back.

44.Pleat fold, redirecting the paw forward.

45.Mountain fold, narrowing the front leg and shaping the front paw.

46.Repeat steps 44–45 on opposite side.

47.Valley fold on both sides, roughly parallel to existing crease, raising the ears.

48.Valley fold, aligning top edge with edge of raised flap from previous step, and unfold.

49.Open partially, and sink fold using creases from previous step.

50.Reverse fold asymmetrically on both sides, redirecting the ears.

51.Valley fold, shifting flap as far as the paper allows, and unfold.

52.Reverse fold both edges using creases from previous step.

53.Pivot the middle flap upward, then valley fold, giving shape to the snout.

54.Open the head partially, and valley fold by wrapping paper onto itself.

55.Mountain fold both sides of the mouth inside the model.

56.Sink fold. Pre-crease as necessary.

57.Mountain fold the two corners inside the model.

58.Mountain fold both sides, rounding the shoulders.

The completed Chihuahua

GREYHOUND

Bred to chase anything that moves quickly, Greyhounds were once prized for their ability to root out crop-destroying animals such as rabbits and squirrels. Uniquely equipped for the task, they have a 270-degree field of vision and can actually see behind their own heads. Though tall, these slender dogs weigh no more than 70 pounds. Their flexible spines allow for all four legs to leave the ground at once, enabling them to reach speeds of 45 mph in just 30 feet. Given a Greyhound’s reputation for speed, it is not surprising that the breed figures so prominently in the business of dog racing.

Greyhounds have been human companions for at least 4,000 years. They were so cherished in ancient Egypt that some royals even had them mummified and placed with them in their tombs. Centuries later in ancient Greece, Homer gave a Greyhound named Argus a starring role in his epic poem, Odyssey. In medieval England, it was once against the law for a commoner to own a Greyhound. In those days, killing one was a capital offense!

Today, Greyhounds that are not fast enough or that have lost their edge are regularly euthanized by those who race them for profit. To counteract this cruel practice, a large rescue community has sprung up to find homes for these dogs. Greyhounds make quiet, low-maintenance pets that rarely bark and require a minimum of exercise. Their short coats come in a variety of colors and require very little grooming. Best of all, these gentle, sweet-tempered dogs are wonderful with children.

Both Greyhounds follow the same set of instructions. To fold the second Greyhound, orient the paper as shown above, and proceed to step 1 on the following page.

1.Orient the paper as shown. Turn over.

2.Valley fold in half in each direction, and unfold.

3.Valley fold, aligning upper edges to center, and unfold.

4.Valley fold, aligning lower edges to center, creasing only as indicated, and unfold.

5.Reverse the crease in the center to a mountain fold, and then collapse along indicated creases, wrapping lower half to the back.

6.Valley fold, aligning edges to center, and unfold.

7.Lower the flap on the back.

8.Valley fold between ends of existing creases, creasing firmly, and unfold.

9.Lift the flap, push the corner where indicated, and reinforce mountain creases along the existing long diagonal creases.

Note: The model will not lie flat.

10.Step 9 in progress. Establish new creases by tucking excess paper between layers, and flatten when flap’s tip extends to opposite side.

11.Rabbit-ear fold using existing creases.

12.Repeat steps 9–11 on opposite side.

13.Valley fold, aligning tips.

14.Valley fold perpendicular to flap’s right edge by first pivoting from upper-left corner.

15.Valley fold, aligning creases to edge underneath.

16.Unfold, reverting back to step 13.

17.Repeat steps 13–16 on opposite side.

18.Valley fold the flap downward.

19.Rabbit-ear fold using existing creases.

20.Release trapped paper, lift excess paper, and flatten.

21.Valley fold flap to opposite side.

22.Release trapped paper, lift excess paper, and flatten.

23.Valley fold, aligning edges, and unfold.

24.Reverse fold using creases from previous step.

25.Reverse fold the top triangular flap using existing creases.

26.Shift the layer to the back, reversing creases to make the model symmetrical.

27.Reverse fold both sides using existing creases.

28.Valley fold between sets of reference points, and unfold.

29.Valley fold, aligning bottom tips to where creases intersect, creasing firmly, and unfold.

30.Sink fold using creases from previous step. Sink fold the indicated edges as well.

31.Valley fold along existing creases to flatten.

32.Shift the corners underneath above the top layer.

33.Turn over.

34.Mountain fold through all layers along existing crease, and unfold.

35.Valley fold, aligning edges to existing horizontal crease, creasing only as indicated, and unfold.

36.Valley fold between corners, and unfold.

37.Valley fold, aligning corners to intersecting creases, creasing only as indicated, and unfold. Turn over.

38.Valley fold between reference points, and unfold.

39.Rabbit-ear fold along existing creases, using both views of the model for reference, while redirecting the legs.

40.Valley fold flap upward, adjusting layers in the upper corner in order to keep the model flat.

41.Establish valley fold on top layer and on part of the layer underneath it, using the interior view for reference.

42.Valley fold flap to opposite side.

43.Repeat steps 40–41 on opposite side.

44.Open top layer on both sides along long vertical creases, then lift and align lower tip to center. Then use remaining existing creases to shift the two flaps down and outward.

45.Mountain fold, aligning edges, to conceal the protruding edge entirely. Squash fold near the top to flatten.

46.Valley fold, wrapping around edges, and unfold.

47.Valley fold model in half, incorporating creases from previous step, and draw the legs together. Rotate.

48.Crimp fold the neck while bringing the head downward.

49.Separate the top layers on both sides so they can be moved independently.

50.Swivel fold, shifting the edge, and tucking excess paper under the ear.

51.Reverse fold the tip of the ear. Reverse fold the back of the ear asymmetrically. Repeat steps 49–51 on opposite side.

52.Valley fold twice, creasing firmly, and unfold. Creases should be parallel.

53.Crimp fold using creases from previous step.

54.Open the head partially, flatten the paper, and then valley fold by wrapping paper onto itself twice.

55.Valley fold, aligning lower edges, creasing firmly, and unfold.

56.Crimp fold using creases from previous step, giving shape to the rear legs.

57.View from below. Mountain fold as far as the paper allows, incorporating a swivel fold near the rear leg.

Note: The model will not lie flat between steps 57–59.

58.Swivel fold once more, thinning the rear legs.

59.The completed swivel fold.

60.Release the triangular flap between layers.

61.Reverse fold both edges of the tail, changing the color of the paper.

62.Mountain fold both front paws, round the front legs, mountain fold both sides near the shoulders, and curl the tail.

The completed Greyhound

BASSET HOUND

The Basset Hound is the quintessential hunting dog. The name is derived from the French word, bas which means “low.” Aptly named, their short legs situate them closely to the ground—the ideal position for tracking. When following prey, their drooping ears drag along the ground stirring up scents as they go. Loose folds around their faces also capture scents, sending them straight to their huge, wet noses. With more than 20 million olfactory receptors, the Basset Hound’s nose is a pretty impressive organ—especially compared to the mere five thousand humans possess. Moreover, a Basset Hound’s white-tipped tail makes it easily identifiable to hunters in the field.

When not actively following scents, the Basset Hound is somewhat of a couch potato. Add to that its habit of greeting each meal as if it were its last, it’s not surprising that the breed can be prone to obesity. Back problems associated with short-legged dogs make it essential for owners to guard against overfeeding. Extra weight places undue pressure on a Basset’s spinal column that can lead to debilitating hip and back issues.

Basset Hounds are typically tri-colored—coming in shades of black, chestnut, and white. A Basset’s low requirement for activity coupled with its sweet, affectionate temperament makes this breed a fine choice for apartment dwellers as well as for families with young children.

Both Basset Hounds follow the same set of instructions. To fold the second Basset Hound, follow the instructions on the next page, and after completing the first step, orient the paper as shown above on step 2.

1.Orient the paper as shown. Valley fold in half in each direction, and unfold. Turn over.

2.Valley fold, aligning edge to center, and unfold.

3.Valley fold, starting crease at end of crease from previous step, and unfold.

4.Valley fold, aligning tips to center, and unfold.

5.Valley fold, aligning tips to farthest existing crease, and unfold.

6.Valley fold, aligning tips to closest existing crease, and unfold. Turn over.

7.Valley fold between each existing crease, and unfold.

8.Valley fold between reference points, the third lines out from the center crease. Turn over.

9.Valley fold, aligning creases along edges of triangular section underneath, and unfold.

10.Unfold triangular flap from behind.

11.Valley fold in half.

12.Valley fold, perpendicular to edge where existing creases meet.

13.Valley fold along existing vertical creases underneath, and unfold.

14.Unfold. Rotate.

15.Valley fold along third existing crease from the bottom on both sides.

16.Reverse fold using existing creases by pushing from below.

17.Valley fold, aligning corners, and unfold.

18.Crimp fold using existing creases.

19.Valley fold flaps on both sides.

20.Close-sink fold indicated section on both sides by pushing down from above.

21.Open-sink fold indicated section by pushing up from below.

22.Valley fold from upper corner, holding paper tightly so it does not shift, and unfold.

23.Valley fold, aligning lowest corner to end of existing crease, and unfold.

24.Crimp fold symmetrically using creases from two previous steps.

25.Valley fold, reinforcing existing crease, creasing firmly, and unfold.

26.Valley fold, aligning lower edge to crease from previous step, creasing firmly, and unfold.

27.Open and stretch all of the pleated layers. View from above.

Note: The model will not lie flat between steps 27–37.

28.Step 27 in progress. Flatten the pentagonal shape using an Elias Stretch fold.

29.Outside reverse fold the small sections on each side.

30.Valley fold, aligning edges to existing creases, creasing only as indicated, and unfold.

31.Valley fold triangular flap upward.

32.Valley fold, aligning edges to center, creasing only as indicated, and unfold.

33.Lower the flap.

34.Valley fold where creases intersect.

35.Swivel fold using existing creases, and squash fold raised sections.

36.Mountain fold, tucking inside the pocket, allowing the triangular section to flip outward.

37.Valley fold, closing the flap, reverting back to step 27.

38.Pleat fold, establishing the mountain crease between existing creases, and unfold.

39.Open the pleated section.

Note: The model will not lie flat.

40.Flatten by re-pleating indicated sections and establishing several new creases.

41.Valley fold flap along its hinge, and unfold.

42.Close-sink fold using creases from previous step.

43.Repeat steps 38–42 on opposite side.

44.Swivel fold, pushing the corner of the foot to shift the excess paper.

45.Mountain fold inside the model.

46.Swivel fold, tucking excess paper inside the model.

47.Swivel fold toward the inside of the model.

48.Repeat steps 44–47 on opposite side.

49.Fold flaps on both sides downward while lifting the tail to a horizontal position. Rotate.

50.Valley fold.

51.Reverse fold along the edge from flap created in previous step.

52.Reverse fold slightly asymmetrically.

53.Mountain fold, further shaping the rear paw.

54.Repeat steps 50–53 on opposite side.

55.Reverse fold, giving shape to the back, and reverse fold to point tail upwards.

56.Mountain fold the very tip of the front paw, and then pleat fold.

57.Mountain fold, thinning the front leg. A small squash fold will be required at the top and bottom.

58.Repeat steps 56–57 on opposite side.

59.Valley fold flap upward, and squash fold to flatten.

60.Valley fold flap downward.

61.Repeat steps 59–60 on opposite side.

62.Pivot the head downward, shifting the paper backward as far as the paper allows, establishing new mountain creases to flatten.

63.Valley fold flap to opposite side.

64.Open the flap from the previous step, and reverse fold so that edges align.

65.Crimp fold, starting the shaping of the snout.

66.Sink fold, rounding the top of the head. Use of a tool, such as a pair of tweezers, may be helpful here.

67.Open the head partially, and valley fold, wrapping paper onto itself.

68.Mountain fold both sides of the jaw inside the model, leaving a small triangular section to represent the nose.

69.Reverse fold the bottom of the ear, and then mountain fold the sides inside, further shaping the ear.

70.Crimp fold. Pre-crease as necessary.

71.Mountain fold, giving shape to the belly.

The completed Basset Hound